posted
I drive a 1996 honda accord with 6x9 infinity reference in the back and 6 1/2 up front, all ran off a 800watt kenwood amp. I want to put some 6x9s in the front because, frankly, they sound better then 6 1/2s. What work is it going to take to make a 6 1/2 hole into a 6x9 hole? I love my infinitys, so I will keep those in back, but what other 6x9s sound comparable to those? compare and contrast kinda thing, thoughts and comments please. Thanks!
-------------------- Stuff is goin down.... Posts: 102 | From: South Bend Indiana | Registered: Sep 2007
| IP: Logged |
-------------------- First and only dual-alternator 'real' Saturn (pre 2002) on the planet (2) 18" Omegas fed by a SoundStream XXX10000 12.75 cubes net @ 30.5Hz, 200 sq inches of port Replaced AC with 250 amp alt 225 amp alternator in stock location (custom bracket) (2) XS Power D3100's 4 power+4 ground 1/0-gauge runs Posts: 1359 | From: OH | Registered: Apr 2007
| IP: Logged |
posted
both Pyle and Kingswood make 8-way 6x9 coaxials. They are 1000Watts and they are 8-way....That means they must be the best!!!!! NOT!
Posts: 5976 | From: Columbus, OH - formerly FL | Registered: Oct 2003
| IP: Logged |
posted
I actually researched everything I could find on Ebay and a few online retailers recently for a friend who needed 6x9s. I found it hard to beat the Infinity Kappa 693.7i. They are not the most expensive, handle alot of power, and will sound as good as most 6x9s out there.