posted
im not against fiberglass, i actually bought a gallon of resin and some cheap matt in case i did come up with an idea for that, i dont mind doing it, i just dont want the WHOLE thing to be fiberglass.
Posts: 385 | From: Hattiesburg Mississippi | Registered: Jan 2006
| IP: Logged |
posted
i dont mind buying a xxx or something of that sort, but i need a 10 inch sub. if i got a single XXX and glassed the sides to get curvature, does it stand a chance at being big enuff to port, or a good sealed box anyways? is there any other subs yall reccomend? i dont want to be STUPID loud, i want to be loud enuff to mess with my ears and all, just like low 140's. does anyone think with the right power and box the SE's can do this?
Posts: 385 | From: Hattiesburg Mississippi | Registered: Jan 2006
| IP: Logged |
andy's got it right, if you wanna play with the big boys you're going to have to make some consessions to the bass habit, or hang it up and buy four 10" bazooka tubes and leave it at that....which if they're on a decent sized amp might actually sound pretty good.
-------------------- Posts: 701 | From: Fort Knox, Kentucky | Registered: Feb 2005
| IP: Logged |
posted
the reason i need my spare is cuz i make a 1000 mile round trip every few months.
Posts: 385 | From: Hattiesburg Mississippi | Registered: Jan 2006
| IP: Logged |
old glass project i started for a type r 12 i think, may of been my 15 rl-p lol, but either way, who thinks if done correctly this could pull 2.5+ out of my trunk?
i have to complete the mold, of course, and make a plug of this one tothen put into my trunk and work off of again, but once it goes all the way up the side and all the way to the seat side of the trunk, u guys think i can pull the space i need?
Posts: 385 | From: Hattiesburg Mississippi | Registered: Jan 2006
| IP: Logged |
posted
Damn!!! Grant H. I have a Brahma 15(1stGen) in a 1.5 cuFt enclsr powered by a 1500w Cadence amp and it bangs!!!(in a minivan). A 10" just ain't gonna do you justice. I dunno maybe you should colab w/sme 1 else thats in-2 car audio also, so yall can come up with other alternatives. No reason you shouldn't be able to fit something bigger and still have access to your spare.
Good Luck.
-------------------- All Reggae all the time. Posts: 313 | From: PHILA,PA | Registered: Aug 2001
| IP: Logged |
posted
seriously, i dont see more than a 10 happening. the shops wont even look at my car when i say i want to port a pair of tens. they just simply say "not possible" and i tell them i will be back when i fit it.
Posts: 385 | From: Hattiesburg Mississippi | Registered: Jan 2006
| IP: Logged |
posted
thats easy to do in a mustang before 05. just gotta go seat side.
Posts: 385 | From: Hattiesburg Mississippi | Registered: Jan 2006
| IP: Logged |
posted
my friend has an 03 mustang w/o the mach stereo system. I'm currently building a box for it that is 14.5" tall X 35.5" wide X 28" deep at the top and 30" deep at the bottom with 52" of port tuned to 30hz for 2 Phoenix Gold Xenon 12s. The subs and port are going to be firing forward into the cabin and are hopefully going to be sealed off from the trunk.
Its going to be 5.8 cubes net
Yes, I am going to have to assemble and glue the box inside of the trunk.
posted
ya forget the spare ..carry a cell phone for a spare .and on long trips just throw a dummy tire in back seat..
Posts: 495 | From: harlan ,iowa | Registered: Jan 2006
| IP: Logged |
posted
Thats what I do, spare in the backseat behind it on the floor standing up for those trips from Texas to Chicago or Texas to Florida. I do it 3-4 times a year.
posted
i wish i could do that but im almost positive my mom and dad arent okay with that. plus its a full 17 inch spare.
Posts: 385 | From: Hattiesburg Mississippi | Registered: Jan 2006
| IP: Logged |
![[Confused]](confused.gif)
Printer-friendly view of this topic