posted                       

"John Nicita" wrote in message
news:alKF7.69092$xe.16900888@typhoon.we.rr.com...
> Just hooked up my RFR3112 in DVC (2ohm) into a serial 4 ohm load and fed
the
> sub in a 1.25 cf' sealed box (actually, I had a Qlogic wedge 1.25cf so I
> slapped it into there. I know most of it is my fault for running 2ohm
DVC's
> to a amp only 2 ohm stable. Anyways, in my pathfinder I have 2 12W4 DVC
> wired into a 4 ohm fed by the Chrome 800.2 bridged, the diffrence? My
> pathfinder is at like 3.5 cf' ported. Man, I was depressed with the bd1000
> and 3112 but I guess thats my fault and now its time to buy another 3112.
> and serial it, and then parrallel the two to give me my 2ohms. Cars a
little
> Hyundai Elentra GT hatchback, figured it would move air very nice just
like
> my SUV. You could say, I'm of the type that likes to be a menance outside
of
> my neighborhood, and never plays my system within 2 miles of my house at a
> volume (keeps them from known). The 3112 is looking for 1 cf' (im giving
it
> 1.25, but thats without the displacemnet of the speaker) there saying 1.50
> ported thats not a whole hell of a lot of a diffrence in "hatchback" space
> 2.5cf for the two sealed or 3cf for the ported encloser. I can sell the
> qlogic on ebay so I dont mind ditching it, it was free and matched my
> interior, I understand that sealed=tightness in the upper ranges, ported =
> lower/deeper bass (MENACE), geez if I knew that why they hell am I wasting
> all your guys time. Anyways, anyone want to clue me hardcore and just tell
> me what I need to hear. Another 3112 and both in a ported 3' following the
> specs, Part of the reason I am confused is that the facing sheet on the
3112
> recomends 1.50 cf' but the white paper PDF shows the specs for fb=35hz,
> pd=4", pl=10.75". So which do I believe and does anyone know how to get me
> the fb,pd,pl for the 1.5cf ported box? I seem to rember that the port on
the
> 1.5cf sealed box is what makes the sub see 2cf' so that might be why Im
> confused. Anyways, someone care to clue me in, because I WASNT impressed
> with what I heard. Jeez. I figured a bd1000 and such a huge sub would
make
> some noise. Im going to start messing with orientation to see if I get
> anything. Its a wedge so I can straight fire front/back, and 60" up and
> front or 60" and back. Guess its time to lay down the dynamat trunk kit
and
> door kits since I already got um......
>
> Thanks
> For reading my book...

Posts: 8 | From: Tustin | Registered: Sep 2001  |  IP: Logged | 

posted                       

the type of person who gives everyone around with a bad reputation of being a distrubance

--------------------
Car Appearance:
Arctic White 99 Camaro
Custom Body Kit
5% tint all around
Streetglow Gold Series Red Undercar Neon
18" Alba Blaze Rims

System:
Starting over

Posts: 141 | From: ny | Registered: May 2001  |  IP: Logged |