posted
Can anyone explain to me a few ideas on how to create speaker grilles that would intergrate with my vinyl door panels? Any on info on this will be greatly appreciated...Thanx
------------------
Posts: 72 | From: new york, ny, usa | Registered: Feb 2000
| IP: Logged |
posted
Thanx guys for showing interest in my topic. I doubt anyone here would be familiar with my car, its a 93 alfa romeo 164. The upper part of the door panels are made of hard cardboard covered in vinyl and the lower part is just plastic. Any help would be great!!!
------------------
Posts: 72 | From: new york, ny, usa | Registered: Feb 2000
| IP: Logged |
posted
"integrate"...I would like to install custom grilles to fit flush into the existing door panel. I want to put speakers in a new location. To do this the panel will need modification to allow the sound to come through. The speakers will be afixed to the sheet metal part of the door. Hope this helps...Thanx guys!!!
------------------
Posts: 72 | From: new york, ny, usa | Registered: Feb 2000
| IP: Logged |
posted
Did an install in one about 3 or 4 years ago and I don't remember what the other side of the doors looked like. I wanted to say we just made some small kicks for it and just replaced factory speakers,it sounded good. Sorry I can't help more just thought I'd throw out that idea.
------------------ "Knowledge is the key that opens the door to endless posibilities!" "It never hurts to try even if it ends up in failure, the expereince will be all worth the while."
Printer-friendly view of this topic