posted
Hey there, Just wondering what I am gonna have to do to strap on a BD1000 to each voice coil of my HX2 15's. Does this entitle getting the gains matched up or just basically hooking them up and hoping for good results. Just wondering before I blow anything up, Thanks, Rick
Posts: 67 | From: Norfolk, NY | Registered: Oct 2001
| IP: Logged |
posted
for best results, use a dual input osciliscope to match the outputs of the amps perfectly. Any decent stereo shop should have one. I am sure you can get them to level set it for like $20. it takes a whole 10 minutes.
posted
BD sync the two amps together instead of running an amp per coil. Run the straped pair at 4 ohm is the same result as running an amp per coil at 2 ohm. In my opinion this is a safer way to run the 2 amps on one sub. I advise not running the strapped pair at 1 ohm! You will get a tad over 2000 rms per sub with a pair synced together, which is plenty for street beating. Even if you sync the amps make sure you match output voltage for each amp. Hey man why ya gotta steal part of my forum name? I had it before ya! J/K
-------------------- Rodney Beckhoff Team Damitzloud Team JBL Street Max 3-4 Posts: 439 | From: Zanesfield, OH | Registered: Jun 2000
| IP: Logged |
Printer-friendly view of this topic