posted
Looking for a little help, I have a set of the old Diamond Audio Hex 3 way that have the 6 inch, 4 inch and a tweet. I don’t have room to put all three speakers in the doors so I can put the 6 and the tweet in the door and put the 4 inch in the kick panel. Or should I just forget about the 4 inch. Can I do this or are they not designed to do that? If I put the 4 inch in the kick I will just make it flush with the plastic molding and will not adjust it for any imaging or anything since this system is suppose to be practical. Will that even be worth it? This is all going in a 02 F250 truck. Oh and does anyone know what the specs are on the Eclipse 8052 crossovers? Yes there are lots of variables here so feel free to ask any question!
-------------------- -------------- Head Unit - Alpine CDA-7949 Processor - Alpine ERA-G320 Changer - Alpine CHA-S624 Front Fill- Diamond Audio Front Amp - PPI PC450 Subs - 3 JL Audio 10W6 Sub Amp - PG ZPA0.5 Posts: 80 | From: Houston, TX | Registered: Jun 1999
| IP: Logged |
posted
or I can put the 4 inch and the tweet in the door and the 6 inch in the rear half door (extended cab) and just forget about any rear sound. just thinking.
-------------------- -------------- Head Unit - Alpine CDA-7949 Processor - Alpine ERA-G320 Changer - Alpine CHA-S624 Front Fill- Diamond Audio Front Amp - PPI PC450 Subs - 3 JL Audio 10W6 Sub Amp - PG ZPA0.5 Posts: 80 | From: Houston, TX | Registered: Jun 1999
| IP: Logged |
posted
put the 4 and tweet in the kick and the 6 in the door.
YOu can do any config you want...you just want the drivers as close to each other as possible, they are designed to work as a 3 way...so your second post is a no-no.
Posts: 2276 | From: East | Registered: Jan 2003
| IP: Logged |
Printer-friendly view of this topic