Lord Dukk please answer

my profile | directory login | register | faq | forum home

»	Termpro Audio Forum » Component Specific Topics » Amplifiers » Lord Dukk please answer

UBBFriend: Email this page to someone!

Author

Topic: Lord Dukk please answer

Maximum power out of an 1100@2.Peramiters 15.7volts in w/12v turn on.
with a burp imp. of 3.5ohms.NeillBarber------------------
in loving memory of the TANK 1986-1999 http://www.termpro.com/asp/competitorstats.asp?Competitor_ID=19

Neill Barber
Senior Member
Member # 1153

posted

Ok to clear up a debate here.

Maximum power out of an 1100@2.

Peramiters 15.7volts in w/12v turn on.
with a burp imp. of 3.5ohms.

NeillBarber

------------------
in loving memory of the TANK 1986-1999 http://www.termpro.com/asp/competitorstats.asp?Competitor_ID=19

Posts: 3756 | From: Thomasville Ga. | Registered: Feb 2000 | IP: Logged |

Actually, I will tell you and we'll see just how long it takes for me to get shot down..I say about 1800 if your impedance is really 3.5ohms and you can keep the voltage up. It's good for more though...------------------
Blow your mind - PORT your box!D R A G U L A
Let us Prey....

Dukk
Senior Member
Member # 1344

posted

Well, I could tell you but....

Actually, I will tell you and we'll see just how long it takes for me to get shot down..

I say about 1800 if your impedance is really 3.5ohms and you can keep the voltage up. It's good for more though...

------------------
Blow your mind - PORT your box!

D R A G U L A
Let us Prey....

Posts: 3690 | From: Abbotsford, BC, Canada | Registered: Mar 2000 | IP: Logged |

NeillBarber------------------
in loving memory of the TANK 1986-1999 http://www.termpro.com/asp/competitorstats.asp?Competitor_ID=19

Neill Barber
Senior Member
Member # 1153

posted

Thank you.

NeillBarber

------------------
in loving memory of the TANK 1986-1999 http://www.termpro.com/asp/competitorstats.asp?Competitor_ID=19

Posts: 3756 | From: Thomasville Ga. | Registered: Feb 2000 | IP: Logged |

------------------
Jake Ryker
plethora9@hotmail.com
I just wanna have fun

[This message has been edited by stryker79 (edited 04-11-2000).]

stryker79
Member
Member # 1376

posted

Where did you get that # Dukk. Not trying to shoot you down, just curious. I read a Carsound review that stated it was roughly 1300. I am not sure what the imped of that test but that was at 14.5 volts I think. I would like to see the info from the test or where ever you got this information, as it would be very helpful to me. Thank you.

------------------
Jake Ryker
plethora9@hotmail.com
I just wanna have fun

[This message has been edited by stryker79 (edited 04-11-2000).]

Posts: 181 | From: Okoboji, IA | Registered: Mar 2000 | IP: Logged |

1400 * (4 / 3.5) * (15.7 / 14) = 1794wattsYeah, more holes than a box of Dunkins but it's gonna be around there...------------------
Blow your mind - PORT your box!D R A G U L A
Let us Prey....

Dukk
Senior Member
Member # 1344

posted

I based it on the few I have seen rated as around 1400 at 4 mono with 14 volts in.
The extra voltage and the slightly lower impedance are good for a bit..
But really, it was a loosely calculated shot from the hip...

1400 * (4 / 3.5) * (15.7 / 14) = 1794watts

Yeah, more holes than a box of Dunkins but it's gonna be around there...

------------------
Blow your mind - PORT your box!

D R A G U L A
Let us Prey....

Posts: 3690 | From: Abbotsford, BC, Canada | Registered: Mar 2000 | IP: Logged |

Printer-friendly view of this topic

Hop To: