posted
I had a box made for my DD9512 and it's pre-drilled for my 8/32" x 1 5/8" screws with 8/32" x 1/4" "T Nuts". Hoever, how in the hell am I supposed to get the "T Nuts" on the back of the screws? Now what do I do? It's not possible to use the vent to get to it either.
-AR
Posts: 611 | From: Killa City | Registered: Nov 2000
| IP: Logged |
posted
either that or before putting in the subs glue the t-nuts into place let them dry but make sure they are as tight to the box as possible then put your screws in. Ive used this many times I bet it would work even better if you used a self lockin nut on the back as csuho said above.
Bill
-------------------- will the world turn their heads to look at you? If they dont its not loud enough! When u think u r loud thats reality when u know u r loud thats insanity!!!!!
TEAM B.E.E.R "beating everyone every run." "PROUD MEMBER OF TEAM XSCARAUDIO" 'Let Us Be Heard'
Posts: 149 | From: Wayland, MI, USA | Registered: May 2001
| IP: Logged |
posted
you guys...T nuts with the little spikes worked awesome in my audiobahn box i made, i'd use those like you are all saying. and it's a lot harder to strip those than the wood or plexi is. if you don't have the spiked t nuts, i would find t nuts either with the spikes or just slightly larger than the hole size so you can hammer them into place...
-------------------- Posts: 299 | From: canaan, maine USA | Registered: Jun 2000
| IP: Logged |
Printer-friendly view of this topic