posted
for a 97 ford explorer 4 door. im installing remote start, and all the wires seem to be testing for 12+ volts. i dont know the diff between the ignition and start wire.
-------------------- Kenneth- TEAM DAILY Louisville, KY Posts: 1328 | From: Floyds Knobs, IN | Registered: Mar 2005
| IP: Logged |
posted
yes it is i get all my wiring diagrams from there for all my alarm installs
Posts: 210 | From: North Prairie Wi | Registered: Apr 2002
| IP: Logged |
posted
ok next question. i got the main power and accessory hooked up for the module. now im on to all the multiple pin connectors. it says the tachometer wire is a tan and yellow wire toward the top of the passenger side firewall. is this on the inside or outside? if it on the inside it is going to be very hard to get to.
-------------------- Kenneth- TEAM DAILY Louisville, KY Posts: 1328 | From: Floyds Knobs, IN | Registered: Mar 2005
| IP: Logged |
posted
alright, found it on the outside. im just going to tap into it with a longer wire and run it through the firewall with the rest of my smaller power wires. wow, remote start can suck. i had no idea.
-------------------- Kenneth- TEAM DAILY Louisville, KY Posts: 1328 | From: Floyds Knobs, IN | Registered: Mar 2005
| IP: Logged |
posted
i work at a shop and have had several people come in talk about bulldog, and the wiring on their is totally wrong.
i use audiovoxs website, if you have a bulldog as well watch out, they have been known to melt stuff lol
-------------------- In loving memory of my father, Doff Harvey April 22,2005
Zapco 1000.4 cadence a7 Kicker SS 6.5 midbass Kicker SS 5.25s Zapco 10's
2x World Champion | 9x State Champion | 14x State Record Holder | 2005 Meca Hall of Fame Member | 2005 Meca Team Hall of Fame Member Posts: 20742 | From: Princeton,WV | Registered: May 2000
| IP: Logged |
posted
no i dont have a buldog, but i have been trusting what their website told me. so far they have been right, but im not sure i can find a tan and yellow wire. it looks to be grey abnd tan. i need to check in daylight. ill check audiovox out, thanks amn,
-------------------- Kenneth- TEAM DAILY Louisville, KY Posts: 1328 | From: Floyds Knobs, IN | Registered: Mar 2005
| IP: Logged |
posted
if i dont have a stock alarm system, i wont see the factory disarm wire will i? i dont know so im asking. if i do have one, i guess ill use it. i bought the car used and it didnt have any chip in key, no keyless, and no alarm to my knowledge. it did have power, though.
-------------------- Kenneth- TEAM DAILY Louisville, KY Posts: 1328 | From: Floyds Knobs, IN | Registered: Mar 2005
| IP: Logged |
posted
if there is no chip in key then there is no alarm. the wire will be there but not used. there is VERY few ford in the late 90s that didnt have a chip in the key. dose the truck remote start?
Posts: 6731 | From: north rose,ny | Registered: Aug 2002
| IP: Logged |
posted
no, im installing that, but having a freaking hard time doing so. there are like 5 wires on the main 9pin harness for the module that i cant figure out where they go. the diagram was wrong for my tach wire, but i think i found the right one. the unit im installing is a avital 4100 i think. im also confused as to how it is going to alarm. there is no siren included with the stuff, and it doesnt say anything about hooking in to the stock horn.
-------------------- Kenneth- TEAM DAILY Louisville, KY Posts: 1328 | From: Floyds Knobs, IN | Registered: Mar 2005
| IP: Logged |
posted
go to: http://techservices.audiovox.com and register for a FREE account. It's great, has very accurate wiring information and most of all..........it's FREE!!!!!!! Just a bit of FYI to help out those in need.
Posts: 1 | From: Orlando | Registered: Nov 2006
| IP: Logged |
Printer-friendly view of this topic