posted
Trying to figure out how to connect the door locks on a 96 Crown Vic
Door Lock Pink/Yellow W/Keyless Positive Trigger Driver's Boot Door Unlock Pink/Light Green W/o Keyless Entry Reverse Polarity
I believe that this is the without keyless entry, so it should be reverse polarity, but it dosen't tell me where to find the the unlock wire nor the color of the lock wire...
How do I connect the tach wire on a 96' Ford Crown Vic for the remote start?
Tach Tan/Yellow ICM Module, 2 Cylinder Setting
this isn't being very clear to me
-------------------- www.U-C-IT.com "Kandy" painted 1988 Monte Carlo SS 24" Motto wheels.....6's for 06' Kenwood KVT-911 Eclispe highs (3) Kicker 15" L5's (2) 15" flip downs, 5.6" fiberglassed into dash, (2) 5" in sunvisors
Drapped up and dripped out....SOLD!!!http://www.sounddomain.com/id/cutlasssalon Posts: 1093 | From: Atlanta, Ga | Registered: Dec 2001
| IP: Logged |
posted
Not to sound like an ass...but if you don't have the ability to find and test those wires, then maybe you shouldn't be doing this.
-------------------- Team Image Dynamics/Zapco/Werewolf/JK Lab Team Kinetik Sick Bastard Audio SQ Who feels it knows it Posts: 7996 | From: Charlotte,NC USA | Registered: May 1999
| IP: Logged |
quote:Originally posted by winslow: Not to sound like an ass...but if you don't have the ability to find and test those wires, then maybe you shouldn't be doing this.
x2
-------------------- You are only as good as your worst install.
posted
David Mclean you sir are the man, I got a printed version of this from my dealer, for my viper alarm but it didnt have the pdf Doc 1076 that this has for dioding the doors/trunk trigger.
quote:Originally posted by winslow: Not to sound like an ass...but if you don't have the ability to find and test those wires, then maybe you shouldn't be doing this.
maybe you weren't trying to sound like an ass, but deffinatly being one with your worthless opinion..along with everyone else talking about x2...thanks to the person(David Mclean) who actually helped...the job is done and works perfectly...thanks to those who actually helped and those worth the worthless opinions shove them x1,x2,x3
-------------------- www.U-C-IT.com "Kandy" painted 1988 Monte Carlo SS 24" Motto wheels.....6's for 06' Kenwood KVT-911 Eclispe highs (3) Kicker 15" L5's (2) 15" flip downs, 5.6" fiberglassed into dash, (2) 5" in sunvisors
Drapped up and dripped out....SOLD!!!http://www.sounddomain.com/id/cutlasssalon Posts: 1093 | From: Atlanta, Ga | Registered: Dec 2001
| IP: Logged |
quote:Originally posted by winslow: Not to sound like an ass...but if you don't have the ability to find and test those wires, then maybe you shouldn't be doing this.
maybe you weren't trying to sound like an ass, but deffinatly being one with your worthless opinion..along with everyone else talking about x2...thanks to the person(David Mclean) who actually helped...the job is done and works perfectly...thanks to those who actually helped and those worth the worthless opinions shove them x1,x2,x3
I will remeber this next time you can't read your manual.
-------------------- You are only as good as your worst install.
If you were such a damned hot shot alarm/remote start installer, you could figure out how to test wires on your own...and not have to post some newb question like that.
-------------------- Team Image Dynamics/Zapco/Werewolf/JK Lab Team Kinetik Sick Bastard Audio SQ Who feels it knows it Posts: 7996 | From: Charlotte,NC USA | Registered: May 1999
| IP: Logged |
Printer-friendly view of this topic