posted
Hey guys/gals! I have a quickie for ya... I am in the midst of swapping full powered doors in place of my manual ones. I have a 500ESP DEI alarm that used to be wired to door lock actuators that were installed aftermarket. Here's the question...
I am rewiring all the windows and locks but would like to know how I would go about wiring the locks (seeing as they used to be working with 2 wire actuators). I don't know if I will wire in the OEM lock control module or not (I had to make my own harnesses and surface mount soldered connections, etc.). I don't want to ruin my alarm brain by wiring this up all wrong.
I know the wiring schematics for this vehicle but I am wondering if anyone has any advice for me? Just to repeat... I am wiring OEM locks to an ESP Viper alarm (I may not wire the factory lock controller if I don't need to).
posted
first of all get the door locks working. using the switches. after it works it should be - trigger. just tie into the lock and unlock wires. you should have triggers coming off your alarm.
Printer-friendly view of this topic