posted
I put roll up module's in my moms 02 GM, now the windows roll up slow and sometimes they stop early. I ran a good power and ground to the modules (it was bigger then the factory wire).I lubed the tracks, what could be the prob??? Help please....
-------------------- Posts: 1074 | From: Ione, CA | Registered: Dec 2001
| IP: Logged |
posted
Are you sure that you tapped into the right wires there buddy? or maybe they should be getting more voltage than the modules are putting out?? Do they roll up and down normal with the factory switches?
I think that I have said too much....................I must go now................the SPL Ninja's are upon me Need more power? UP YOURS!! with Excessive Amperage! Posts: 6116 | From: Northern California | Registered: Nov 1999
| IP: Logged |
quote:Originally posted by idbl_Fanatic: Are you sure that you tapped into the right wires there buddy? or maybe they should be getting more voltage than the modules are putting out?? Do they roll up and down normal with the factory switches?
PS, you should install MSN at work
yes. voltage was good. yes. we share this computer.
-------------------- Posts: 1074 | From: Ione, CA | Registered: Dec 2001
| IP: Logged |
posted
If ti is a DEI peice, you can adjust the tension on the module. This lets the module know when to stop movement on the window to prevent damage.
I think that I have said too much....................I must go now................the SPL Ninja's are upon me Need more power? UP YOURS!! with Excessive Amperage! Posts: 6116 | From: Northern California | Registered: Nov 1999
| IP: Logged |
![[Big Grin]](biggrin.gif)
![[Wink]](wink.gif)
Printer-friendly view of this topic